Microcement Pendant Lamp
Spedizione gratuita
Garanzia di rimborso entro 30 giorni
Microcement pendant lamp — raw texture, four silhouettes, gold fitting.
Microcement formed around a mold, air-dried, and demolded — the surface deliberately left rough: pores, tool marks, and slight irregularities along the edges where the mold detached. A gold E14 brass fitting connects the shade to a braided cord above. The result is a lamp that appears archaeological, as if it predates the building in which it hangs — raw material, warm light, complete restraint. Available in four distinct silhouettes: a broad fluted dome, a wide flat disc, a tall slender cylinder, and a compact bowl.
Raw texture, modern simplicity — microcement, gold, braided cord
Microcement — rough expansion, pores, and demolding marks are intentional
Microcement shades are cast in molds and air-dried rather than fired. During drying, natural pores form on the surface. Where the mold separates, faint marks may remain. These characteristics — the grain, pores, and slight irregularity along the edge — are deliberate expressions of the material's nature. They are what give each shade its raw, handcrafted presence. They are not defects.
Tap to enlarge — pore and texture of the microcement surface. Each piece will differ slightly.
Cast Microcement
Cast in a mold and air-dried — porous, raw surface, each piece naturally unique.
Gold Brass Fitting
Warm gold E14 fitting and canopy — the only polished element against the raw concrete.
4 Silhouettes
Fluted dome / wide disc / slender cylinder / compact bowl — cluster or hang individually.
Each model is a distinctive silhouette. All share the same concrete-gray finish and gold E14 fitting. They can be ordered individually or as a cluster.
Dia 16 × H 20 cm
Dia 25 × H 15 cm
Dia 6 × H 31 cm
Dia 15 × H 16 cm
A + B + C cluster at varied drop heights
Models A, B, and C installed in a cluster above a dining table — the wide disc (B) highest, the dome (A) at medium height, and the slender cylinder (C) lowest — create a sculptural composition that works especially well in spaces with exposed ceilings or wabi-sabi interiors.
∅ 5.9″ + ∅ 9.8″ + ∅ 2.4″
∅ 6.3″ + ∅ 9.8″ + ∅ 2.4″
∅ 6.3″ + ∅ 9.8″ + ∅ 5.9″
∅ 5.9″ + ∅ 5.9″ + ∅ 5.9″
∅ 6.3″ + ∅ 6.3″ + ∅ 6.3″
∅ 9.8″ + ∅ 9.8″ + ∅ 9.8″
🔍 Tap any diagram to enlarge
E14 (small screw) — bulb not included
Compatible with E14 LED bulbs and candle or globe Edison filament bulbs. A warm-white 2700–3000 K E14 LED is recommended — the warm amber tone complements the raw concrete gray and gold brass fitting, producing a soft glow that highlights the shadowed texture of the concrete surface. A 4–6W E14 LED is appropriate for the compact scale of all four models. A candle or globe Edison filament bulb works especially well in Model C (slender cylinder), where the exposed bulb is partially visible through the open base.
E14 LED bulb selection guide →
| Materials | Concrete, Metal, Iron |
| Models & dimensions | A (Fluted Dome): ∅ 16 × H 20 cm B (Wide Disc): ∅ 25 × H 15 cm C (Slender Cylinder): ∅ 6 × H 31 cm D (Compact Bowl): ∅ 15 × H 16 cm |
| Bulb socket | E14 (small screw) |
| Light source | LED or Edison filament bulb (not included) |
| Voltage | AC 110–240V |
| Cord | 59″ braided cord — adjustable, extendable on request |
| Control | Standard wall switch (not included) |
| Wiring | Wall-mounted |
| Mounting | Ceiling-mounted |
| Environment | Indoor use only |
| Body finish | Gold (brass fitting and canopy) |
| Shade finish | Concrete Gray — raw texture, pores, and normal demolding marks |
| Certification | North America · EU · AU · Saudi Arabia |
There are pores and marks along the edges of my shade. Is something wrong?
No — these are distinctive characteristics of microcement, not defects. Microcement is formed in a mold and air-dried rather than fired in a kiln. During the drying process, gases escaping from the material form natural pores on the surface. Where the mold separates, faint marks may remain along the edge or sides. Both aspects — the porous texture and demolding marks — are inherent to the manufacturing process and contribute to the shade's raw, handcrafted quality. They cannot and should not be repaired.
Which model is best for a dining table?
Model B (Wide Disc, ∅ 25 cm) provides the broadest downward light distribution and works well as a single lamp above a small round table or a dining table for 2 people. For a dining table seating 4–6 people, grouping 3 lamps — such as A + B + C at varied drop heights — creates a composed, sculptural installation that covers the full length of the table and adds visual depth. Model A (Fluted Dome) is the most versatile single lamp for a kitchen island or café-style counter.
Can I clean the concrete shade?
Dust with a soft, dry brush or use low-pressure compressed air. Do not use wet cloths, water, or any cleaning solution on the concrete surface — microcement can absorb liquids and become permanently stained. The gold brass fitting can be cleaned with a dry microfiber cloth. Avoid all abrasive contact with the concrete, which will damage the surface texture. The shade is not waterproof and should not be installed in bathrooms or kitchens where contact with steam or water is likely.
Is the microcement pendant lamp certified for North America and Europe?
Yes. It has certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Dimensions & questions
Each piece is made to order in our atelier — here is what most customers ask before choosing theirs.
What are the dimensions of the four models?+
Model A (fluted dome): ∅ 6.3″ × H 7.9″. Model B (wide disc): ∅ 9.8″ × H 5.9″. Model C (slender cylinder): ∅ 2.4″ × H 12.2″. Model D (compact bowl): ∅ 5.9″ × H 6.3″. Each can hang individually or be grouped with others.
Which model works best above a dining table?+
Model B (wide disc, 9.8″ diameter) works well on its own, or group Models A, B, and C at staggered heights for a sculptural composition. The 59″ braided cord is adjustable and extendable on request to suit your table length and ceiling height.
What type of bulb does this pendant lamp use?+
E14 small screw base. A warm-white E14 LED (2700–3000 K) is recommended to complement the raw concrete and gold fitting. Edison filament bulbs work well, especially in Model C, where the bulb is partially visible.
What makes the surface texture so distinctive?+
Each shade is cast in a mold and air-dried, not fired. Natural pores form during drying; faint demolding marks remain along the edges. These irregular textures — grain, pores, and edge marks — are deliberate expressions of the material's nature, not defects. Each piece is naturally unique.
Can I customize the cluster combination or cord length?+
Yes. Our atelier builds each fixture to order. Choose from six preset 3-head combinations, or request a custom combination of the four models. The 59″ cord is also extendable on request.