Signal Workstead Wall Lamp
Spedizione gratuita
Garanzia di rimborso entro 30 giorni
Ash Wood · Brass Shade · Pull-Cord Switch
A compact wall lamp built around two honest materials—solid ash for the body, brass for the shade—and one honest gesture: a pull cord to turn it on and off. No touch panels, no apps, no hidden switch. Just the satisfying weight of the cord in your hand.
The Signal is an industrial design distilled to its quietest expression. Small enough to live beside a bed, above a reading nook, or flanking a hallway mirror—and considered enough to sit comfortably in modern, mid-century, and traditional rooms.
See It in Action
AC 110V Only · Do Not Use 12V
This fixture uses G4 bi-pin AC 110V bulbs—it is not compatible with 12V low-voltage G4 bulbs. Using a 12V bulb will cause immediate failure or damage the fixture.
When purchasing replacement bulbs, confirm that the packaging is marked G4 / 110V AC—the bi-pin base looks identical across the two voltages.
Shade Finish — Choose at Checkout
Warm brass shade. A classic pairing with the natural ash wood body.
Brushed silver shade. A cooler contrast to the wood’s warm tone.
Walnut-stained shade. A deeper, richer tone for darker palettes.
All three versions share the same solid ash wood body. Only the shade finish changes. The wood grain naturally varies between units—subtle differences in tone and pattern are part of the material’s character.
Dimensions
Materials & Craftsmanship
Solid Ash Body
Lamp body in natural ash wood. The grain varies—each piece is unique.
Metal Shade
Hand-finished metal. Available in brass, silver, or walnut finish.
Pull-Cord Switch
Tactile pull cord for intuitive on/off operation. No wall switch required.
Product Notes
| Dimensions | L 12.5 × W 5.5 × H 12.5 cm / L 4.9″ × W 2.2″ × H 4.9″ |
| Body Material | Solid Ash Wood |
| Shade Material | Metal |
| Shade Finishes | Brass · Silver · Walnut |
| Switch | Pull cord on the lamp |
| Socket | G4 Bi-Pin Base |
| Voltage | 110V AC only |
| Bulb | Sold separately — LED recommended |
| Wiring | Hardwired |
| SKU | RDW-81016 |
Service & Warranty
Defective on Arrival
If your fixture arrives damaged or does not work, contact us within 30 days for a replacement or refund — no disassembly required.
Parts & Service
Pull cords, shade hardware, and wiring can be repaired. Contact us for replacement parts.
Installation
- Hardwired wall installation — a licensed electrician is recommended.
- Fits a standard single-gang wall box. All mounting hardware is included.
- Use only G4 AC 110V bi-pin bulbs. Do not replace with low-voltage 12V bulbs.
- The pull-cord control turns the light on/off — a wall switch is optional, not required.
- Do not disassemble the fixture body. If problems occur, contact us instead of opening the unit.
- For indoor use only. Not suitable for bathrooms or damp locations.
FAQ
Why can't I use a 12V G4 bulb? +
The G4 bi-pin base is physically identical in the 12V and 110V versions, but the electrical systems are fundamentally different. This fixture is wired for direct 110V AC power — installing a 12V bulb will cause immediate failure or damage the fixture. Always confirm that the bulb packaging states G4 / 110V AC.
Which bulb do you recommend? +
A warm-white (2700K) 110V AC G4 LED bulb rated at 2–3W provides the most flattering light. LED is strongly preferred — it operates at lower temperatures, lasts longer, and is safer in the compact brass shade. Avoid halogen G4 bulbs, which generate significant heat.
How does the pull cord work? +
A fabric pull cord extends from the lamp body. Pull once to turn it on; pull again to turn it off. Since the switch is on the lamp itself, you don’t need a wall switch — the fixture can be wired directly to an always-on power supply.
Is the lamp dimmable? +
The pull-cord switch is a simple on/off mechanism — it is not dimmable. For dimming, you would need to wire the fixture through a compatible wall dimmer and pair it with a dimmable 110V G4 LED bulb. Contact us if you need assistance with dimmer compatibility.
Will the ash wood grain vary between units? +
Yes. Each lamp body is cut from solid ash, so the grain pattern, color depth, and subtle tonal warmth differ between units. This natural variation is part of the material, not a defect.
Is the body made of solid wood or veneer? +
Solid ash wood — not a veneered or engineered substrate. The material has real weight and will age beautifully over time.
What if my fixture arrives defective? +
Contact us within 30 days of delivery with a brief description and photos. We’ll arrange a replacement or full refund — you won’t be asked to disassemble the fixture or troubleshoot at home. That’s our job.
Download