Bronx 52″ ceiling fan
Spedizione gratuita
Garanzia di rimborso entro 30 giorni
Lighting and airflow in one fixture — this ceiling fan combines modern industrial lines with retro-inspired warmth. The integrated LED sits above the wood blades, and a six-speed DC motor moves air quietly enough to run overnight.
The two-way rotation handles both seasons — downdraft cooling in summer, gentle updraft circulation in winter. One remote controls both speed and light, so you never need to leave your seat to adjust either.
Why wood-effect ABS instead of solid wood? For a 52″ blade span, lightweight blades allow the DC motor to move more air with less noise. Real wood at this size can crack or warp with fluctuations in humidity — wood-effect ABS provides the natural look without the long-term risk and remains perfectly balanced year after year.
Lightweight, moisture-resistant, finished to look like natural wood.
Gently diffuses the integrated LED — warm, even, glare-free light.
Six speeds, ultra-quiet operation, designed for nighttime use.
| Dimensions | ∅ 52″ × H 9.8″ D 132 × H 25 cm |
| Downrod | 3.9″ + 7.9″ / 10 cm + 20 cm (both included) |
| Light source | Integrated LED · 36W × 2 · Warm white (default) |
| Voltage | AC 110–120V, 60Hz |
| Motor | DC · 6 speeds |
| Rotation | 2-way (summer / winter) |
| Control | Remote control (included) |
| Dimmable | Yes — via the included remote control (no wall dimmer required) |
| Body material | Metal |
| Blade material | ABS, wood-effect finish |
| Shade material | Acrylic — White (fixed) |
| Motor material | Pure brass |
| Wiring | Fixed |
| Location rating | For dry indoor environments only |
| SKU | RDC-153927 |
Integrated LED — no bulb required. The light source is integrated into the fixture and cannot be replaced by the user. Both the light and fan speed are controlled via the included remote control — a standard wall on/off switch is all you need.
- Fixed ceiling installation — a licensed electrician is recommended.
- Standard downrod mounting; 10 cm and 20 cm downrods are included for flexible ceiling heights.
- A minimum ceiling height of 7 ft (2.1 m) is recommended for safe blade clearance beneath the fan.
- For dry indoor environments only — not certified for outdoor, bathroom, or other damp-environment installations.
- Pair the remote before first use by following the included pairing sequence.
Need visual help? Watch the step-by-step installation video on YouTube →
Is the LED light dimmable? +
Yes — dimming is controlled using the included remote. A separate wall dimmer is not required; a standard on/off switch is all you need.
What does the 2-way rotation actually do? +
In summer, run the fan in the forward direction (downdraft) for a refreshing breeze. In winter, reverse the direction (updraft) to gently push warm air down from the ceiling without creating a draft — useful for rooms with high ceilings. Both directions are switched using the remote control.
How quiet is it? +
The DC motor is designed for quiet operation overnight at low speeds. At higher speeds, you will hear the airflow moving through the blades, but not motor hum — DC motors are inherently quieter than fans with older AC motors.
Can I install it on a sloped or vaulted ceiling? +
The fan comes with 10 cm and 20 cm straight downrods intended for standard flat ceilings. For a sloped or vaulted ceiling, you may need a slope-compatible ceiling mount — check the installation guide for the specific ball-joint angle limit before purchasing.
Is it certified for outdoor use or covered porches? +
No — this fan is certified only for dry indoor environments. Do not install it in bathrooms, on covered patios, or in damp or wet environments.
What if the LED eventually fails? +
Because the LED is integrated (not a replaceable bulb), the entire light module is serviced as one unit. Integrated LEDs are rated for tens of thousands of hours of normal use, so this is rarely a short-term concern — but if an issue occurs, please contact us for assistance.